Each of us will encounter the situation of living alone. Sometimes the thorny problem of damage to the valve core of the basin faucet is, so how to change the valve core of the basin faucet? Today I will answer them one by one for you.

1. Close the main water valve first, then buckle the faucet handle with a red and blue mark of about 8 mm, loosen the fixing screw counterclockwise with a flat screwdriver, take off the handle, and disassemble the faucet with an adjustable wrench For the spool, use a wrench to open the upper part of the gland and take out the ceramic spool inside.

2. Close the main water valve first. You can use a screwdriver to insert under the handle of the faucet and pry it up from left to right. Pry it on one side, slowly, with even and steady force, and then remove the valve core.

Close the main water valve, unscrew the blue cover of the right handle, remove the screw inside with a Phillips screwdriver, take off the handle, leak the valve core and unscrew the valve core with an adjustable wrench.