A well-designed shower can ensure that the amount of water distributed by each nozzle is basically the same, so you must see the water when choosing a shower. The water saving function is the key point to consider when purchasing a shower.

Some showers use a steel ball valve core and are equipped with an adjustable hot water controller, which can adjust the inflow of hot water into the mixing tank, so that the hot water can flow out quickly and accurately. This type of shower with a more reasonable design saves 50% of water than ordinary showers.

When selecting, let the shower head tilt the water out. If the spray hole at the top is obviously small or not at all, it means that the internal design of the shower head is very general. pleasant experience.

Secondly, look at the nozzle, and pay attention to whether the shower is easy to clean. The blockage of the water outlet of the shower is often caused by the accumulation of impurities in the screen cover. After the shower is used for a long time, scale will inevitably deposit. If it cannot be cleaned, some nozzle holes may be blocked. When the nozzle is blocked, the well-designed shower nozzles often protrude out for easy cleaning, or the nozzles are made of silicone material, and the scale deposited on the nozzles can be wiped off with a rag or hand when cleaning. Some showers are also set to automatically remove scale, so you can ask more questions about this when purchasing a shower.

Looking at the coating and the valve core, in general, the brighter and more delicate the surface of the shower, the better the process treatment of the coating. A good valve core is made of ceramics with extremely high hardness, which is smooth and wear-resistant, and prevents leakage and leakage. Consumers must try to twist the switch by themselves. If the hand feel is poor, it is best not to buy this kind of shower.

Finally, shower accessories will directly affect the comfort of their use, and special attention should be paid to them. For example, whether the water pipe and lifting rod are flexible, the flexural ability of the shower hose and steel wire, whether there is a ball bearing to prevent twisting at the joint of the shower, whether there is a rotary controller on the lifting rod, etc.